Oxynova® provides specific benefits in sewage systems of various types.
Helps maintain municipal sewer systems by:
• Cleaning the pipes
• Reducing the viscosity of the pumped water
• Extending the life of the infrastructure
• Cleans fat, oil and grease accumulation in collectors
• Improves operation of pumping equipment, transmission pipes, and the technical characteristics of the pumps
• Applies to industrial and food preparation facilities
• Expedites reduction of organic contaminants down to the regulated levels
• Significantly lowers toxic gases: hydrogen sulfide, ammonium, nitrate, and others
• Improves dewatering/thickening ability, reducing formed sludge volume
• Considerably reduces electrical energy use, substantially saving operating costs
• Notably reduces foul odors
• Increases capacity for the wastewater treatment plant without additional capital investment
• Reduces need for aeration of the wastewater and activated sludge mixture
• Increases plant’s efficiency after each influx of contaminant levels from influent wastewater
• Integrates with preexisting equipment – only chemical feed pump and dilution/storage reservoir needed
• Rapidly degrades solid and liquid organic waste at accelerated rate
• Significantly reduces sludge volume and sedimentation
• Minimizes pumping frequency, saving costs
• Increases lifespan of tank
• Considerably lowers foul odors
Oxynova® is a super-concentrated powder that needs to be mixed with water prior to applying. The amount of Oxynova required varies based on the volume of water being used and the size of the affected area. Refer to the dosage chart below for conversion information.
Oxynova® is a super-concentrated powder that needs to be mixed with water prior to applying. The amount of Oxynova required varies based on the volume of water being used and the size of the affected area. Refer to the dosage chart below for conversion information.
Application
To mix, add Oxynova to water and SHAKE WELL for at least 90 seconds or until the powder is completely dissolved. When preparing in large volume containers, add the Oxynova first to allow the water pressure to help mix the solution. Once mixed, Oxynova can be used immediately or within 20 hours.
Application using a sprayer or hose is recommended.
Landfills and Waste Sites
Initial application of Oxynova on landfill or waste site requires a shock treatment.
Water Volume |
Oxynova Dosage |
Sample Protocol |
Frequency |
|
Bulldozer with Water Tank & Spraying System |
||||
100 - 200 gallons |
1 KG |
Cleanout Area |
Daily |
|
200 - 300 gallons |
4 KG |
Working Phase: |
Daily |
|
Water Truck Application |
||||
2,000 – 4,000 gallons |
5 KG |
One round via water truck on working phase and cleanout area. |
Daily |
*Based on 100’ x 100’ working phase area.
Wastewater Treatment Plants
Due to varying treatment objectives, engineering and influent water quality of wastewater treatment plants, technical consultation is required for protocol information. E-mail us at techsupport@shopoxynova.com to see if a pilot program is right for you.
Handling and Storage:
Store in a cool, dry place and avoid contact with water and moisture, which will cause the product to activate. Keep gloves and handling equipment dry when scooping Oxynova®.
Safety First:
Oxynova® is nontoxic, but we like to be cautious. Wearing a dust mask and protective gloves is recommended when handling Oxynova. Avoid inhalation, ingestion, and contact with eyes. If any occur, flush with water and contact a physician or poison control.
We aim to provide you with the highest quality product and an equally stellar level of service. For a seamless integration of Oxynova® into your operations, take advantage of our technical consultation offerings.
Phone Consultation
Technical consultations over the phone are available at no charge for up to 30 minutes. To schedule a call with one of our technical specialists, please contact us at support@useoxynova.com
On-site Consultation
On-site technical consultations are available for a fee, and the costs associated are based on the scope of work. For more information about our onsite technical specialists, please contact us at support@useoxynova.com
Oxynova® is a super-concentrated powder that needs to be mixed with water prior to applying. The amount of Oxynova required varies based on the volume of water being used and the size of the affected area. Refer to the dosage chart below for conversion information.
Application
To mix, add Oxynova to water and SHAKE WELL for at least 90 seconds or until the powder is completely dissolved. When preparing in large volume containers, add the Oxynova first to allow the water pressure to help mix the solution. Once mixed, Oxynova can be used immediately or within 20 hours.
Application using a sprayer or hose is recommended.
Landfills and Waste Sites
Initial application of Oxynova on landfill or waste site requires a shock treatment.
Water Volume |
Oxynova Dosage |
Sample Protocol |
Frequency |
|
Bulldozer with Water Tank & Spraying System |
||||
100 - 200 gallons |
1 KG |
Cleanout Area |
Daily |
|
200 - 300 gallons |
4 KG |
Working Phase: |
Daily |
|
Water Truck Application |
||||
2,000 – 4,000 gallons |
5 KG |
One round via water truck on working phase and cleanout area. |
Daily |
*Based on 100’ x 100’ working phase area.
Wastewater Treatment Plants
Due to varying treatment objectives, engineering and influent water quality of wastewater treatment plants, technical consultation is required for protocol information. E-mail us at techsupport@shopoxynova.com to see if a pilot program is right for you.
Handling and Storage:
Store in a cool, dry place and avoid contact with water and moisture, which will cause the product to activate. Keep gloves and handling equipment dry when scooping Oxynova®.
Safety First:
Oxynova® is nontoxic, but we like to be cautious. Wearing a dust mask and protective gloves is recommended when handling Oxynova. Avoid inhalation, ingestion, and contact with eyes. If any occur, flush with water and contact a physician or poison control.
We aim to provide you with the highest quality product and an equally stellar level of service. For a seamless integration of Oxynova® into your operations, take advantage of our technical consultation offerings.
Phone Consultation
Technical consultations over the phone are available at no charge for up to 30 minutes. To schedule a call with one of our technical specialists, please contact us at support@useoxynova.com
On-site Consultation
On-site technical consultations are available for a fee, and the costs associated are based on the scope of work. For more information about our onsite technical specialists, please contact us at support@useoxynova.com